RX-6R | JUKI High Speed Automatic Smt Pick And Place Machine

JUKI Pick and Place Machine

This is applicable to dual-lane production.*6
Compact footprint : the width is just 1.25m
Equipped with standard Placement Monitor check function.*1
Replaceable head allow you to configure a production line best suited to the current repirments.*6
High-speed component placement using high-speed non-stop vision recognition.*3
Wide range of components and boards: tall components, large components and large boards.
Brand new Matrix Tray Sever TR8S improves the component capability and productivity.

JUKI SMT Placement Machine RX-6R
Placement speed	Chip : 52,000CPH2 IC : 14,000CPH3
Component size	0402mm(01005 inch) ~ 50mm×50mm4 0402mm(01005 inch) ~ 100mm×100mm / 50×180mm5
Board size	Single lane conveyor: 50×50 ~ 610×590 / 905×590(2times clamping) Dual lane conveyor*6: 50×50 ~ 360×250 / 360×450(single lane conveyor specification mode)
Head unit	6×6nozzle head 6×3nozzle head *6

*1 Only available RX-6B 6 nozzle head
*2 When using RX-6R
*3 Option
*4 When using RX-6R/RX-6B 6×6 nozzle head
*5 When using RX-6B 6×3 nozzle head
*6 Only available RX-6B

描述

High-Speed Compact Modular Mounter RX-6R
Board size	Single lane conveyor		50×50 ~ 610×590 / 905×590mm(2times clamping)
	Dual lane conveyor		–
Component height			6 / 12 / 20mm
Component size	Laser recognition		0402 ~ 50mm×50mm
	*Vision recognition2**	Standard camera	3mm×3mm ~ 33.5mm×33.5mm
		High-resolution camera	1005 ~ 24mm×24mm
Placement speed	Chip	*Optimum3**	52,000CPH
		IPC9850	29,000CPH
	*IC4**		14,000CPH
Placement accuracy	Laser recognition		±0.04mm(Cpk≧1)*5
	*Vision recognition2**		±0.04mm
Component loading quantity			Max.160 in case of 8mm tape (on a Electric double tape feeder)

High-Speed Compact Modular Mounter RX-6B (6×6 nozzle head)
Board size	Single lane conveyor		50×50 ~ 610×590 / 905×590mm (2times clamping)
	Dual lane conveyor		50×50 ~ 360×250mm*1
Component height			6 / 12 / 20 / 25 / 33mm
Component size	Component size		0402 ~ 33.5mm×33.5mm
	*Vision recognition2**	Standard camera	3mm×3mm ~ 100mm×100mm / 50×180mm
		High-resolution camera	1005 ~ 48mm×48mm / 24mm×72mm
Placement speed	Chip	*Option3**	34,000CPH
		IPC9850	23,000CPH
	*IC4**		11,000CPH
Placement accuracy	Laser recognition		±0.04mm(Cpk≧1)
	*Vision recognition2**		±0.03mm
Placement loading quantity			Max.160 in case of 8mm tape (on a Electric double tape feeder)

*1 Single lane conveyor specification mode max 360×450mm
*2 Option
*3 When using the single lane conveyor specification
*4 Placement speed of IC components is estimated value when placing 36 pieces QFP component (dimension 10mm square or smaller) on M size PWB overall,picking from both front and rear side with all nozzles simultaneously.
*5 Under the JUKI condition